Sewing order and simple patterns for women's panties

Sewing underwear with your own hands, the patterns of which are not difficult, can be done without any problems. Self-production has many advantages. The model can have an original design, be sewn from any material and decorated according to an individual principle. You can make almost any model of women's panties and men's underwear.

What measurements are needed for men's underwear

To sew men's boxer shorts, you need to think through the entire construction of the pattern. The product should be comfortable and hygienic. Usually, chintz is used as a base for men's underwear. But you can sew a good and comfortable thing to wear only after taking certain measurements:

• Half waist circumference (W).
• Half hip circumference, namely at the widest point across the buttocks (BB).
• Hip circumference at its highest point.

These measurements are suitable for sewing both family briefs or boxers, and swimming trunks. You just need to take into account the features of the model and, if necessary, take additional measurements.

After taking measurements, you can determine the size of the product itself. You can also construct a pattern taking into account all the features of the figure.

Pattern of women's knitted panties

Sewing underwear for beginners should not differ in complexity of the model type and material. Many options for women's panties are sewn from knitwear. This type of textile is very flexible, as it can be partially deformed.

To understand how to sew women's panties from knitwear, you need to use the following pattern:

Knitwear is unique in terms of use, so you can use more complex sketches for sewing.

Pattern of women's pantaloons

Not so long ago, girls and women wore only pantaloons. Over time, the parameters began to decrease. Minimalistic panties began to be considered fashionable - the less fabric, the better. But over time, pantaloons began to return to fashion, naturally in an interpreted form. Now such models began to be called panties-shorts.

Cotton is usually used to make this type of underwear. The material is pleasant to the touch, hygienic, easy to work with, natural, has a huge variety of colors and prints.

There is a huge variety of models of modern trousers. Each type has its own shapes, lengths and sizes. The decor can also be varied. According to the standard, lace frills are made along the bottom of the trousers.

Women's shorts-panties, the pattern of which is distinguished by the simplicity and elegance of the lines:

To give the finished product a more stained glass and aesthetically attractive look, it is worth using unique shapes that resemble "barrels". The length should be medium, and the legs themselves should be quite loose. The model is more of an aesthetic option than a practical one. Therefore, you will not be able to wear pantaloons with frills under a tight dress or trousers.

Corset pattern

Pattern of women's panties - these are the first stages for a beginner craftswoman. More experienced ones can create entire ensembles of underwear. The ideal addition to any type of panties is a corset.

The principle of sewing a corset, which will be an ideal addition to a set of underwear:

• A do-it-yourself corset pattern will help you create a personal product taking into account the features of shapes and figures. You need to line up the first piece of the pattern according to the figure. The dart solution at the waist in this case is 1 cm.
• Preparing the second part. Raise the center of the chest by 1 cm and shift it to the right by 0.7 cm. Draw a vertical strip through the resulting point, reducing the volume under the chest.
• Move the dart solution along the waist of the main drawing by 2 cm to the line of the second relief.
• By lining up the outlines of the front cut of the corset on the 1st side part, you can see that the parts have overlapped each other.
• Widen the front part by 1 cm on the side near the armhole, and also along the bottom. Draw a cutting line.
• Now the sketch of the back is formed. It should be narrowed by 1.5 cm at the side armhole, and then add 1 cm at the very bottom.
• Trace the resulting pieces onto the fabric and cut them out. The finished corset pattern should look like this:

Usually corsets are laced. Therefore, holes are formed along the line of the product connection, which it is desirable to frame with metal rings. This procedure should also be done along the 2nd shelf. A ribbon or lace will then be threaded through these holes. You can sew in a hidden zipper or sew on hooks.

Bikini pattern

You don't always want to figure out how to sew panties for a woman using a standard pattern. Bikinis look more elegant and attractive. This type of panties is more attractive because they are more open.

Every woman should have this type of underwear in her arsenal, as bikinis fit the figure perfectly, highlighting the advantages and hiding the disadvantages. Underwear can be sewn from natural fabrics or lace. Combined models are considered the most relevant.

The principle of creation is to make the right pattern. This can be done by knowing the basic parameters of the figure:

In order for the underwear to be wearable and of normal sewing quality, it is worth using only a sewing machine. After making the pattern, all the parts are assembled, which can be done according to the following scheme:

The product can be complemented with ribbons, lace, satin or guipure. Decorative textiles can be used to make inserts, overlays, appliques, and trim.

Full size thong pattern

Thongs are becoming increasingly popular these days. These are ultra-small panties, the back of which fits tightly between the buttocks. Due to this design feature, the underwear does not form a fold on the surface of the buttocks. This option is suitable for wearing under special clothes of a unique cut. To make it, you need to prepare tools and materials:

• meter tape;
• ruler;
• pencil;
• paper;
• awl;
• scissors;
• small scissors for cutting threads;
• seam ripper;
• needles for pinning parts;
• sewing machine;
• desk lamp;
• material;
• fittings.

The pattern for the thong looks like this:

In this case, the size of all the details matters. You should pay special attention to the preparation of the width of the background strip and the general parameters of this model. The narrowest place should be no more than 1.5 cm wide. Otherwise, the thong will become an uncomfortable thing. As a rule, you should focus on the width of the edging used.

You can use a simpler version of the pattern, consisting of one piece.

Sewing is done as follows:

1. Cut out a pattern consisting of 1 piece.
2. The gusset is formed separately.
3. Using an overlock, finish the top edge of the gusset.
4. Then baste this element to the main part.
5. To form the edging of the product with an elastic band, you should start working from the back top edge.
6. Gradually move to the sides of the panties.
7. When sewing, you need to leave loose elastic bands of approximately 20-25 cm on each side. The size of such remnants depends on your own dimensions and the ability of the elastic band used to stretch.
8. At the very end, the top of the front part of the panties is processed, where 3 cm of elastic is also left on each side.
9. All elastic bands are secured with a zigzag stitch.
10. Cut off excess pieces of rubber bands.
11. After sewing, it is recommended to steam all seams thoroughly so that everything falls into place.

This type of panties can hardly be classified as everyday, but rather as a "bed" type for seducing a loved one. Therefore, in the sewing process, a lot of lace, guipure inserts, ribbons, and all kinds of frills are actively used.

Brazilian briefs: pattern

Brazilians have become one of the most popular models, as this version of the model belongs to the type of very sexy and at the same time comfortable underwear. The peculiarity of the model is that the main fabric for sewing is guipure or thin lace. Additionally, the back of the product is constructed in such a way that the lower roundness of the buttocks is maximally open during wear.

The pattern for Brazilian panties looks like this:

Algorithm for sewing the simplest Brazilians:

1. Cut out the details of the future product - front + back, there should be no seam on the bottom. Cut the gusset out of natural fabric.
2. The elastic band around the legs is sewn to the back using a machine using a zigzag stitch.
3. The elastic should be stretched slightly and at the same time the edge of the fabric should be folded inward by 0.6 cm.
4. Sew the lace to the front piece using an overlock machine.
5. Connect the front and back at the place where the gusset will be fixed. You need to use an overlock. Secure the back of the gusset with a zigzag stitch.
6. Make 1 side seam.
7. Sew on the belt. You should stretch the elastic a little. But it is better to make the 1st seam on the overlock along the edge.
8. Make the 2nd side seam on the overlock.
9. Form an outer seam on the waistband using a zigzag stitch.

The most common and understandable type of pattern for any model of panties in the style of "Brazil". In order to be able to additionally correct the flaws of the figure, it is worth raising the waist line as much as possible.

How to sew a gusset to panties

To understand how to sew a gusset, you need to pay attention to the model and pattern of the product. The entire algorithm of work, which determines the principle of stitching this element, will depend on this.

If the panties pattern was made from a finished product and the back is made in one piece, then the gusset will be sewn in as follows:

1. The top seam of the base part is overcast on an overlock. It is important that the resulting seam stretches well. When forming an overlock, you can stretch the seam by hand. If there is lace, it is sewn on on a sewing machine. In this case, a zigzag seam of small straight stitches is used.
2. Almost all models have a hidden elastic band for the legs. To do this, take a thin elastic band, sew it to the edge of the garment with an overlock under slight tension. Then fold it over on a sewing machine and stitch it with a zigzag stitch of small straight stitches.
3. Sew the side lace front pieces to the main piece. Topstitch all edges and stitching areas. Be sure to overcast the top edge and sew a lace strip on the waistband.
4. Now you can make a seam along the gusset line. To prevent the seam from sticking out during wear, you can secure it on a sewing machine. This should be done in the place where the lace is sewn on.
5. I started to sew one side seam on the overlock.
6. Next, sew on a beige or white elastic band using an overlock machine so that it partially blends in with the color of the skin.
7. Sew the second side seam on the overlock of a sewing machine.
8. Sew the elastic on a sewing machine.

If you do not complicate the model of panties from the very beginning and perform all stages of the sewing algorithm in the exact sequence, then there will definitely be no problems with sewing on the gusset.

Every girl dreams of beautiful, comfortable and original underwear. But many questions remain when sewing panties. You can make an "intimate" wardrobe item yourself, using clear and simple algorithms. First, you should decide on the model, and then make the simplest pattern. Then "assemble" all the details.