What glue is best to use to make slime yourself

Even the huge variety of slimes on the market does not allow to fully satisfy all the needs of slime lovers. A self-made slime can bring joy even to the most "spoiled" connoisseur of slimes with their unusual requests. Also, the process of creating a stretchy mass can cause great pleasure. There are a huge number of recipes that use any adhesive composition, but only a small part of them turn out to be "working" when tested.

What glue is suitable for making slimes

When choosing an adhesive liquid that will be used in the process of creating a slime, it is important to consider its composition and main characteristics. Slime lovers are increasingly asking the question - what glue is suitable for slimes? The working adhesive composition for slimes should at least be compatible with sodium tetraborate, since this drug is one of the important components of any high-quality slime.

A good glue for slimes is a product of a well-known brand, the name of which is known to everyone. In order not to be disappointed with the result obtained, it is important to approach this moment as responsibly as possible.

You can often find glue as one of the components in making slime. It can be office glue, construction glue, PVA glue.

Not all brands on the stationery market are suitable for making slime. The following names have been identified through experience as ones that will definitely make a quality slime:

• Products of the company "Luch".
• PVA Stolyar "Moment".
• Berlingo stationery.
• A favorite product of all slimers from the Elmers company.

There are other brands that offer quality adhesives, but they are subject to controversy.

Elmers transparent

Many people recommend using a transparent compound from an American manufacturer called Elmers to create slimes. Its main characteristics are similar to regular PVA Super, but the quality is much higher.

What kind of glue do you need for slime? Most bloggers prefer Elmers. It can't be bought in a regular store, but only ordered online.

The special composition is intended not only for office supplies, but can also be used for handicrafts.

The main qualities for which this product is valued:

• Reacts calmly to temperature changes.
• Consumption is much lower than that of analogues.
• High environmental friendliness rating.
• Amazing adhesive properties.

Berlingo stationery

Another inexpensive representative of the “PVA community” is the adhesive composition from the Berlingo company.

When looking for an answer to the question of what glues are used to make slime, they always come across this manufacturer. A representative of the Berlingo company will definitely take an honorable place in this list.

When using it, it is very important to observe the proportions. The quality of the slime directly depends on the thickness of this component. Using the composition of this manufacturer will allow you to make a mass that will stretch perfectly.

Beam

White PVA, produced by Luch, is a cheap office glue. The manufacturer is Russia.

Experienced slimers believe that it is the most versatile and easy to work with. It is suitable for making almost any mass. You can order it online or buy it at any nearby stationery store.

PVA glue for slimes from LUCH is thick and instantly reacts with almost any activating substances.

Moment

If you take Stolyar glue for slimes, you need to dilute it before using it. The recommended ratio is 1:1. This is due to the fact that in its original form it is very thick. By adding shaving foam to it, you can get a very interesting slime that will stretch beautifully and click when pressed.

Construction glue for making slimes

The use of construction glue gives the finished product elasticity and increased strength. The only downside is that it is toxic and unsafe.

The most common materials used to create slime are:

• Titanium.
• Master.
• Alina.

Other brands of working PVA

An interesting glue that allows you to make transparent slime is Attache. It consists of alkaline and silicate components.

Its second name is liquid glass. When combined with activators, it instantly acquires the property of viscosity and produces interesting clicking sounds when pressed.

What brands of glue are not suitable for slime

Before you buy any glue, you need to remember that not all types are suitable for making slimes. The result can be very unpredictable:

• the mass will curl up and turn into flakes;
• will become liquid and simply spread out;
• will not gather into a lump.

That is, the following are not suitable for use: all solid types of glue, tape glue.

It is also not recommended to use the following brands:

• Inteks.
• Hatber.
• Brauberg.
• Cullinar.

Can I use already opened glue?

To create slime, it is still recommended to use newly purchased glue. A quality slime will only be made from a “fresh” composition. That is, it is important to check the expiration date, which is indicated on the package.

How to Make Slime from Glue - Top 5 Methods

Before using glue to create slime, it is important to understand that a specific type of slime requires a specific adhesive:

• It is better to make glass mass from silicate glue.
• For the type of slime that will be called fluffy, almost any glue is suitable. The main thing here is shaving foam, it is what gives airiness and softness.
• For slimes that make a characteristic crunchy sound, it is recommended to use construction glue or Elmer's glue.
• For the so-called jumpers, who can easily withstand impacts, slimers advise using the thickest possible compositions. In this case, it is important not to overdo it with activators. The final result directly depends on how many of them are added at this stage.

Slime from PVA SUPER and sand

To make slime from glue and sand, you need to prepare the following ingredients:

• PVA Super.
• Kinetic colored sand. It can be replaced with regular yellow sand.
• Sodium tetraborate.
• Baking soda.

Sand is poured into a cup, 50 ml of glue is poured in and mixed. Then sodium tetraborate is added, only a few drops are needed.

At this stage, it is necessary to achieve the desired consistency. This can be done with water or adding sand. After thorough mixing, add soda and mix again.

Transparent slime made from glue

To create a transparent slime, you can use Erich Krause glue. In addition, you need to prepare the following components:

• Warm water - 150 ml.
• Glue - 1 tablespoon.
• Naphthyzinum - 1 teaspoon.
• Baking soda - 1 teaspoon.

It is necessary to gradually pour glue into the water and mix thoroughly. At the next stage, the thickener naphthyzine should be added. Only after this can soda be added. If the consistency is not satisfactory, then a little more thickener is added.

Toothpaste, PVA and shaving gel

It is very easy to make soft and airy slime. To make it you will need:

• Glue.
• Toothpaste.
• Shaving gel.
• Any available activator. For example, sodium tetraborate.

Pour PVA into the prepared container, then add warm water and mix thoroughly. The approximate proportion is 2:1. Add shaving gel and toothpaste to the resulting composition. The activator should be added at the very end.

Transparent slime from office PVA

The simplest recipe is slime, which can be made from just three ingredients:

• Stationery, preferably silicate glue - 50 ml.
• Warm water - 100 ml.
• Sodium tetraborate - teaspoon.

First, mix the activator and water. Gradually, literally drop by drop, add the adhesive composition to the resulting mixture.

After mixing all the ingredients, it is necessary to achieve a uniform consistency. To activate all the ingredients, the sealed container with the slime should be placed in the refrigerator for 2 days.

Slime made from glue and toilet paper

You can make a mass that will resemble an air cloud not only in appearance but also to the touch from the following components:

• Toilet paper.
• Shampoo or shower gel.
• Dye, used optionally.
• Silicate glue.
• Soda.
• Eye drops.

First of all, you need to tear the toilet paper as small as possible. In a separate bowl, mix all the detergents; at this stage, it is important to achieve stable foam.

After mixing the paper with the foam, it is necessary to thoroughly knead all the lumps. And only after that can you gradually introduce the silicate mass. Soda and eye drops are added at the very end.

Useful tips

Making a slime is not a complicated procedure. The principle is to combine polymer raw materials and some kind of thickener. You can use a special adhesive composition specifically designed for creating slimes, or you can replace this expensive component with a cheaper variety. This can be the well-known PVA or transparent silicate.

What can replace glue?

The recipe for making slime usually always includes glue. It can be very different: construction, office, moment or even special, designed for making slime.

But there are several options for making slime that don’t require glue.

• First recipe. Pour 40 ml of any shampoo into a bowl, gradually add starch and mix until thick. Once the consistency is uniform, remove the mixture from the bowl and knead thoroughly by hand. For convenience, you can grease your hands with any fatty oil. The result is a very pleasant to the touch and elastic slime.
• The second recipe. In advance, you need to buy a face mask-film, preferably in the form of a spray, shaving foam, sodium tetraborate. The mask is poured into a cup and the same amount of shaving foam is added to it. After thorough mixing, the activator is poured in. 2-3 drops are enough. The slime will begin to thicken within 5-10 minutes. It is important to continuously knead it with your hands during this entire time.

How to Store Glue Slime at Home

Since the shelf life of a slime directly depends on the components it is made of, it is different for each product. Glue slimes are practically eternal, but masses consisting of natural ingredients, unfortunately, are not so tenacious.

Regardless of the ingredients in the slime, it is recommended to store it in a cool and dark place. It does not react well to sunlight and severe frosts.

To preserve them, you can use an airtight container or a plastic bag. The main thing is to limit air access to the toy. Optimum humidity varies between 80-85%.

To get a quality toy that will bring joy for a long time, it is important to take a responsible approach to the selection of all components without exception.

The huge variety presented on the stationery market will allow you to choose the right ingredient that will not only match the financial capabilities of the slime artist, but will also not disappoint you in the work process.