There are several ways to make various toys with your own hands. To do this, you only need to choose the right materials and choose the technique. If you have no experience in any kind of handicraft, you can choose the simplest methods. A thread dog is a simple toy that requires a minimum amount of materials, a little time and a desire to make a cute little thing.
- How to make a dog from threads: step-by-step description
- What threads are best to use?
- What else do you need for work?
- Work process
- How to Make a Pom-Pom Dog: Master Class
- What threads are best to use?
- What else do you need for work?
- Work process
- How to make a dog from yarn with your own hands
- What yarn is better to use
- What else do you need for work?
- Work process
How to make a dog from threads: step-by-step description
Making a dog from threads is quite simple. The technique involves wrapping a special template and tying the threads into bundles. No special preparation is required for this work, the level of difficulty is low.
What threads are best to use?
For this method, you can choose any thick threads. The color can be chosen at will. However, to make the toy look more natural, it is recommended to choose gray, brown, white or black threads.
What else do you need for work?
To make a dog, you will also need cardboard measuring 6*10 cm, scissors. To make a toy, you should also take small pieces of furniture fabric - you will need to make ears from it. However, if there is no material. Then you can use another, the main thing is that it is dense.
Work process
The process of making a dog from threads is quite simple.
Please note! It is important to follow the sequence of actions and not to rush.
Step-by-step instructions for creating a toy:
- Take a cardboard blank and wind the selected threads onto it. You need to make about 60 turns.
- You need to carefully remove the yarn from the workpiece and place the resulting skein on the table.
- Repeat the described procedure once more, only this time make 70 turns from slightly thinner threads. Also remove and place next to the first skein.
- Cut out a small piece of fabric for the ears, 4 cm long and 1 cm wide.
- A ring made of thick yarn needs to be tied with a thread in the central part.
- After this, it needs to be cut from the opposite side.
- All the yarn needs to be straightened in one direction to form a bundle.
- It is necessary to make a muzzle. To do this, you need to step back about 1 cm from the knitted edge and tie the bundle in a circle.
- In the resulting piece, you need to throw back a small amount of yarn and place the blank for the ears.
Next you need to proceed as follows:
- After this, the strand needs to be returned to its place, step back about a couple of centimeters and tie the bun again.
- After three centimeters, repeat the dressing again.
- To make the paws, you need to separate the bundle into two parts, each of which needs to be tied in two places.
- Next, the body is made - at the first stage, you need to cut the second ring (from thin yarn). The resulting threads need to be wrapped around the workpiece.
- Near the base you need to make another binding, try to make it tight.
- Step back three centimeters and repeat the tying.
- The remaining bunch needs to be divided into three parts - this will be the tail and two paws.
- The legs need to be tied in two places, and the same thing should be done with the tail (if desired, you can make any tail).
The work is finished, the dog made of threads is ready. The method is very simple, does not require skills and complex abilities.
Attention! Such toys can be made from any thread, but the thicker it is, the bigger the dog will look.
How to Make a Pom-Pom Dog: Master Class
Toys made from pompoms are cute and voluminous. They are also easy to make, you will need a minimum of materials, as well as time for production. A do-it-yourself pompom dog is an interesting activity that will allow a child to learn how to use various tools and create interesting things on their own.
What threads are best to use?
To create a pom-pom dog, it is better to use thicker threads. Thinner ones will make the pom-poms less voluminous, and you will need much more of them. You need to prepare yarn of two colors, preferably of the same quality and thickness.
What else do you need for work?
To create a similar toy, you will need other tools:
- scissors,
- multi-colored felt - small pieces,
- glue,
- beads for eyes,
- a small piece of leatherette for the nose.
You can also use a variety of decor to decorate the toy.
Work process
To make pompoms you need a special device, but if you don't have one, you can use simple cardboard blanks. To create a blank, you will need to do the following:
- On cardboard, you need to draw circles with diameters of 10, 8 and 5 centimeters. You need to make two pieces of each type.
- Inside the large circles you need to draw a circle with a diameter of 3 cm, in the five-centimeter circle - a circle of 2 cm.
Next, the resulting rings need to be cut out of cardboard. Each needs to have a cut half a centimeter wide. You will get six figures with cuts.
The templates are ready, you can start making the toy. The MK of such a process is described below:
- Place the pieces together in pairs, aligning the cuts.
- Take a large ring, put a thread on top and start wrapping the figure around the entire diameter. The procedure is carried out from the central part to the outer one.
- When the ring is completely wrapped, the process continues in the opposite direction. Repeat until the inner hole is reduced by half. The more threads, the fluffier the pompom.
- Cut a small piece of thread from the same ball and place it between the two circles on one side and the other.
- After this, the wound threads need to be carefully cut with small scissors, gradually placing a piece between them.
- Once the yarn is completely cut, the thread needs to be pulled tightly between the cardboard circles and tied so that the pompom does not fall apart.
Then proceed as follows:
- Then you need to carefully remove the templates and straighten the pompom. In the same way, you need to make another smaller pompom for the head and four small ones, which will be the paws.
- On the small template you also need to make another pompom from yarn of a different color, from which the dog's face will come out.
- The tail will also be of a similar size, only it can be made from yarn of several colors at once.
When all the blanks are made, you can begin assembly:
- You need to attach one small pompom to the medium one, which will result in a head with a muzzle.
- Then you need to connect the resulting part with the largest workpiece.
- You need to attach small pom-poms to it to make paws, and make a tail on top.
- Cut out a nose piece from leatherette and glue it onto the face as an applique, then carefully glue the beads in place of the eyes.
- Cut out a tongue from felt, and ears from a different color, and glue them to the head.
The finished craft of a dog made of threads can be decorated with various decor, you can sew a bone for it or even make a small house.
How to make a dog from yarn with your own hands
There are many ways to create a dog from yarn. In some cases, you can use a variety of materials at hand, thanks to which the toy will turn out even more similar and beautiful.
What yarn is better to use
To make a dog, you can use absolutely any yarn. The thicker it is, the fluffier and more voluminous the toy will be. It is even permissible to use thin threads, but you will need much more of them. In addition, very thin yarn is not always convenient to use.
Attention! It is worth remembering that the thickness of the yarn also affects the appearance of the dog, so it is worth thinking in advance what kind of model you plan to create.
What else do you need for work?
To make it you will need some simple additional items that can be found in any home:
- a small empty plastic jar,
- a small amount of felt,
- cardboard that is twice as long as the can,
- small pieces of satin ribbons,
- buttons for eyes and nose,
- various decorations.
Work process
The process of making such a dog from yarn is quite simple and does not require any special efforts or skills:
- The jar and lid need to be covered with fabric.
- Then you need to wind yarn onto the cardboard blank, carefully remove it and tie it in the middle. You will need 19 of these blanks.
- The resulting blanks need to be folded in the middle (where they are tied) and glued around the jar - 10 pieces in total.
- Several bunches also need to be glued to the lid (across it). First, 4 pieces are attached, then 3 more pieces are attached perpendicularly on top of them.
Smooth everything out, then glue another bunch to the finger below the lid, but so that its ends are directed upwards.
After this, repeat the action, but the ends of the bundle should be directed downwards.
- Next, you need to cut the edges of all the bunches and straighten the yarn. Make a small tuft at the top, which you can decorate with a bow.
- Make ears from yarn and decorate them as well.
- Then find the place for the eyes, nose and tongue. Also carefully secure them.
Finally, you can decorate the dog with a variety of decorations - bows, rhinestones and ribbons.
Please note! Such a toy is very light, the kids will be happy. In addition, even a child can make it with the help of an adult.
It is not difficult to make a dog from threads with your own hands. There are several different ways, all of them are quite simple and do not require special skills and abilities.
Such an activity will interest both children and parents, and will also allow them to spend time usefully. The toy will please everyone for a long time, you can make a similar gift for a birthday or New Year.
