Simple patterns of a dress with a flounce at the bottom: sewing by hand

Wearing dresses with flounces is the use of a romantic style. Such decorations appeared at the end of the 18th century and became very common from the middle of the 19th century. At the end of the 20th century, the use of flounces again became very popular. Princess Diana made a significant contribution to its popularization. Dresses with flounces emphasize the romanticism of a woman, help her feel special. A home craftswoman has the opportunity to make a beautiful dress with a frill at the bottom herself, its pattern should not cause difficulties.

Who suits the frill style?

When talking about flounces, we mean strips of fabric that are draped on a dress in various places. Their use is common in the lower or upper parts of clothing. Vertical flounces are also used. Some models may use a combination of both.

This style is suitable for women who want to look more romantic. In such dresses they look more feminine and flirty. The use of a frill helps a woman look special. It goes well with a trapeze dress.

Using this detail allows you to create a sense of volume. Therefore, it is important for a woman to consider what kind of impression she wants to make when choosing. For example, for those whose overall figure outline is close to an inverted triangle or rectangle, a flounce located at the bottom will give certain adjustments that will allow you to look more harmonious. For those with wide hips, this dress will make them even more voluminous. Therefore, in this case, you should not choose such a model. In this case, you should pay attention to a dress with a flounce on top.

For those who are short, flounces will suit if the dress is short. On tall girls, this detail will look harmonious on dresses of any length. Wrap dresses may suit them.

Dresses with flounces are very popular. You can find suitable patterns on the Internet. You can also use those offered by Burda.

Recommendations for choosing fabric

For creating such dresses, thin fabrics that will flow beautifully are best suited. Silk, chiffon, satin, gauze, organza, lace or guipure are often used.

For short or medium-length dresses, chintz, cotton or cambric may be suitable. It is worth paying attention to the use of modern materials. For example, neoprene is a good choice for a dress with a frill. It is pleasant to the touch and breathable.

Fabric consumption

When sewing a flounce, you need to take into account its features. Sewing the flounce to the dress from below is done in such a way that it goes in a wave. At the same time, its upper edge is sewn and remains slightly mobile, and the outer edge hangs freely. Therefore, it is customary to cut it in the form of a part of a circle, a ring. The fabric consumption is a square piece on which the entire flounce, cut in the form of a ring, will fit entirely.

In order to determine the size of the cut for the pattern, you will need to determine the diameter of the outer circle of the pattern. To do this, measure the length of the bottom edge of the garment to which the flounce is sewn. It must be divided by 6.28 to get the radius for a circular pattern. Then add the width of the flounce to the resulting value. For the pattern, you will need a square cut with the obtained side length. How to sew a flounce to the bottom of the dress will be discussed below.

You can make frills from a rectangular piece of fabric in the form of a strip of the desired width. In this case, the long side should match the length of the bottom edge of the main part.

Patterns

When creating a dress with a frill at the bottom, the pattern is made as follows. It is convenient to use a basic pattern for this.

First, you need to reduce the shoulder line and outline the new contours of the armhole.

Then you need to widen and make the neckline deeper.

Now you need to shorten the dress to the desired length. In doing so, you need to cut off the front and back parts of the pattern.

The bottom should be widened.

After this, you need to transfer the resulting patterns onto thick paper. This procedure is not difficult even for beginner craftswomen. In the future, based on the patterns, it will be necessary to cut out the dress.

Features of the cutting process

In order to cut out the necessary details for sewing, it will be necessary to take into account the following when cutting out a dress with frills:

• In addition to cutting out the details, in accordance with the prepared patterns, it will be necessary to make undercut facings for the neckline. They are made for the front and neckline. It is necessary to provide a width of 4-5 centimeters.

• When cutting, it is necessary to ensure that the grain lines at the front and back are in the same direction.
• It is necessary to provide for reinforcing the made facings on the inside with interlining.

This will be the dress with a frill at the bottom, the pattern is now complete. Next, you need to start sewing the dress.

Progress of sewing work

When all the details of the dress are ready, it is time to sew it. A dress with a frill at the bottom is easy to sew with your own hands. To do this, you need to do the following:

1. You need to stitch the chest darts on a sewing machine. Now you need to position them upwards and iron them carefully.

2. The edges of the shelves must be processed with an overlock.
3. Now we need to tackle the seams on the shoulders. To do this, the cuts are processed with an overlock. The same process is needed with the lower edges of the sleeves.
4. Now you need to attach the sleeves. To do this, sew them into the armhole. To fully prepare the bottom of the sleeves, wrap their edges twice and stitch them on a machine. Here, it is not necessary to use a machine for the seams. In this case, you can sew using a blind stitch made by hand.
5. Next, make a sleeve and side seam. For this, it is enough to make one common pass.
6. Next, you need to sew the neck facing. First, do this on one side. This should result in an open ring. Now you need to process the outer edge of the facing. This must be done with an overlock. After completing this action, the facing must be sewn into a ring.

7. The facing remains to be attached to the neckline roll-out.

8. On the part of the facing that goes to the shoulder seams, you need to trim the allowances a little. This is necessary to reduce the thickness of the fabric. On the remaining areas, you will need to make notches on the allowances of the facing.
9. Now you need to turn the facing back. The allowance is folded onto it and the facing is done. The line should not be located further than 2-3 millimeters from the seam. After this, the facing is folded to the wrong side and carefully ironed. This can be done with a small edge.
10. Now you need to stitch it using a blind stitch.

This completes the sewing of the main part of the dress. How to sew ruffles from fabric will be described further. Now it remains to sew on the flounce.

How to make a frill

There are several ways to cut and sew a frill for the bottom of a dress. Below is a more detailed description of how to sew a frill to the bottom of a dress.

For these purposes, you can use a frill cut in the form of a ring. In this case, the bottom part will be wavy. How to sew a frill to the bottom of a dress: its inner part is attached to the bottom of the main part of the dress. Since the outer side of the flounce is wider, it will go in waves, creating the impression that the frill is flowing.

A similar method is cutting in a spiral shape.

You can make a flounce for a woman or a girl by taking a straight strip of fabric of the desired width. However, it must be sewn to the main part of the dress in a special way.

To do this, you need to follow the step-by-step instructions:

1. The shuttlecock is folded into a ring. Its center should be marked. Two seams are made along the edge with a wide stitch. It is required that the threads come out on both sides of each seam.
2. It is important to ensure that the size of one part of the frill obtained in this way matches the length of the back, and the other - with the front, taken along their lower edge.
3. The threads need to be pulled slightly. At the same time, it is necessary that the fabric in the form of a half-sun is evenly distributed.
4. The frill should be tacked to the lower edges of the main part of the dress. After that, it is stitched and an overlock is made on the edges.

The frills of the flounce cannot be ironed, because this will smooth out the folds on the skirt and the frill will lose its special, romantic look.

Sometimes an elastic band is used in the shuttlecock.

A dress with a flounce at the bottom will suit those women who want to emphasize that they are special. At the same time, you need to carefully monitor that the figure matches this style. It is important to remember that the frills located at the bottom increase the visible volume of the hips and at the same time should emphasize the advantages of the figure. There are a large number of dresses with frills at the bottom, among which many women will find the most spectacular.