Making slimes at home without glue is often difficult. In this case, cosmetic products can come to the rescue. Slimes made from a film mask are not only quite elastic, but also smell great. To prepare the toy, it is recommended to strictly follow the attached instructions.
- Why do people use face masks to make slime?
- Which film masks are suitable for work
- What can replace the component?
- Do you need sodium tetraborate?
- Recipe options for independent work
- Without glue
- Without sodium tetraborate
- Without thickener
- With shaving foam
- Little tricks and life hacks from experienced slimers
- How to store and use ready-made toys
Why do people use face masks to make slime?
The film mask is considered one of the most popular components for making toys for beginner slimers. The slimes made from it are as good as those made using glue.
This cosmetic product is a thick, sticky liquid. After applying to the face, it hardens, sticks to the skin, turning into a film that can be removed in one motion. It is because of these qualities that the mask has become popular in this field.
On average, the price of this cosmetic product starts at 100 rubles. This is not the cheapest ingredient for making slimes, but if you are allergic to glue, you have no choice.
Which film masks are suitable for work
The component can be purchased at almost any cosmetics store.
For one slime you will need the entire tube of the product, so it is worth calculating your budget.
For reference! Efficiency does not depend on price, so you can choose the cheapest options.
What can replace the component?
Recipes for making slimes without using a film mask and glue are less popular, since they are not suitable for beginner inventors due to their complexity. At home, you can get the perfect toy without these ingredients, but you will need more patience and time for kneading. The point is in the composition of these components, which is why not every other product can replace them.
The glue is based on polyvinyl acetate, and the base of the film mask is polymers. When adding an activator, special molecular bonds are formed, thanks to which the slime has the properties of a non-Newtonian fluid, that is, it can stretch, but not tear. These are the components required for making slimes. Even the size of the prepared toy depends on their quantity.
Shampoo, liquid soap, hand cream or toothpaste are often used as a substitute for the peel-off mask. They often act as an auxiliary component that will give the hand gum softness and tenderness.
However, they can be used as a base, but in this case there are some peculiarities:
- It is worth choosing the thickest products. It is recommended to take shampoos from the moisturizing series, since they meet the presented parameters, and toothpastes of gel consistency.
- The large amount of liquid contained in these components may require the use of more thickener.
- Foam can interfere with the cooking process. The selected ingredients contain a fairly large amount of foaming agents, so it is recommended to mix the mixtures thoroughly, but not whip them.
Additional information! Ingredients such as starch, salt and flour can be used to thicken the mixture. Heating is often required to achieve the desired consistency.
Sodium tetraborate cannot be used as a thickener, since this cosmetic product does not contain polymers in the required quantity.
Do you need sodium tetraborate?
There are recipes based on face masks both with and without sodium tetraborate. This product is a good thickener, so slimes made with it are similar to store-bought options.
This does not mean that if you do not add this ingredient, the toy will not work, or will not be good enough.
Recipe options for independent work
Film cosmetic mask is a good alternative to PVA glue, as its consistency resembles it. If you don’t have the stationery at hand, you can replace it with a skin care product.
Without glue
To make matte slime, you don't need to use glue. The recipe includes the following components:
- film face mask;
- boric acid powder;
- baking soda;
- shaving foam;
- dye (optional).
In a deep bowl, add the mask and foam, mix. At this time, if desired, you can add a dye (it is recommended to use in liquid form). Then, add a quarter teaspoon of baking soda and boric acid to the resulting mixture, mix thoroughly.
Please note! At first, you should stir the mixture in a bowl, but after it has acquired a uniform consistency, you can continue doing this in your hands.
Without sodium tetraborate
Making slime from a peel-off mask is easy, as it does not require much time to mix the mass, and it is not always necessary to use sodium tetraborate, which is often not available in the house.
A clear slime can be made using contact lens cleaner, baking soda, and a colorless cosmetic. To make it, follow these steps:
- Squeeze the mask into a deep bowl.
- Add a quarter teaspoon of baking soda.
- Gradually add the lens storage solution, stirring the mixture constantly.
Once you have the desired consistency, you can take the slime in your hands and knead it a little.
Without thickener
You can make a slime from a peel-off mask, toothpaste and dye. For this purpose, you need to mix the main ingredients in equal proportions, color the resulting mass. The bowl with the mixture should be placed in a water bath and constantly stirred.
When the mass reaches the desired consistency, remove the bowl from the heat and refrigerate for a couple of hours. After this time, knead the slime with your hands.
With shaving foam
Making slime on a film mask is easy, as it does not require any complex products. To prepare the toy, you will need:
- mask;
- starch;
- sodium tetraborate;
- shaving foam.
Cosmetic products need to be mixed in a 1:3 ratio and colored at this stage. Start whipping, add a teaspoon of starch in the process and continue the action.
Little by little, you should start adding the thickener, without stopping stirring. When the mass starts to curl around the stick, you should take it in your hands and continue stirring. The slime will be airy.
Additional information! If you use a black peel-off mask, there will be no need for dye. To create a cosmic effect, you can add glitter of different colors and sizes to the slime.
Little tricks and life hacks from experienced slimers
There are a few tricks worth taking note of if you don’t want to waste your money.
It is not recommended to immediately throw away sodium tetraborate jars. A fairly thick liquid in large volumes remains on the walls of the vessel, and therefore it is worth using it up to the end. You need to pour up to half the volume of the bottle of water and shake it thoroughly for several seconds. After this, the resulting component can be used to make slimes.
Also, don't waste contact lens fluid. If there is a person in the house who uses it for its intended purpose, then you should ask him not to pour the precious product into the sink, in which the lenses were overnight. It is no longer suitable for subsequent storage of an item for improving vision, but it is quite suitable for making toys, since it does not lose its thickening properties.
How to store and use ready-made toys
After receiving information on how to make slime from a film mask, you need to find out how to store the finished toy.
- For storage, it is recommended to use an airtight container with a tightly closing lid. Some toys are recommended to be placed in the refrigerator, as they need to be stored at a low temperature.
- There should be a small amount of water at the bottom of the jar to wet the toy after use. After closing the lid, shake the container so that the liquid completely covers the slime.
The slime needs to be salted from time to time. Every day, add a few pinches of salt and stir.
To keep the toy looking its best, wash it in a bowl of water once a week. It is not recommended to drop the slime, as it collects surrounding dust and dirt.
For reference! If all recommendations are followed, the toy can last up to 3 months, but it is not eternal, which is worth remembering.
To make the toy slide, add glycerin to the composition. Hydrogen peroxide will give the material lightness and airiness. And to create a slime that glows in the dark, you can buy a fluorescent composition in the store.
Do not forget about safety precautions. If PVA glue is used in the production of slimes, then you need to open the windows to ventilate the room. Not only a professional fragrance, but also a few drops of essential oil will help give the toy a pleasant aroma. However, you should not allow the pure product to come into contact with the skin of your hands, as this may cause an allergic reaction or chemical burn.
You should cook with rubber gloves and stir with a wooden stick or spatula.
Making slimes at home is a popular pastime these days. This activity is no less exciting than playing with ready-made slime. At the same time, the financial costs are often much less than when buying a ready-made product.
