Pattern and sewing of a school skirt for a girl with your own hands

Sewing a skirt is an ideal start to developing sewing skills, as it does not require any effort. How to sew a children's skirt? The article discusses in detail the topic of sewing different types of skirts. DIY school skirt for a girl - patterns are presented below.

How to make a pattern for an A-line skirt

The A-line silhouette has a trapezoid shape - a flared model.

Measurements:

  • OT - waist circumference.
  • HH - hip height.
  • OB - hip circumference.
  • DI - product length.
Example of a homemade skirt
Example of a homemade skirt

Technique for creating a pattern:

  • Place a vertical segment down on the paper, length VB-1 cm.
  • From the point above, a segment equal to DI is measured downwards.
  • Select the 3 resulting points.
  • From the points, draw horizontal segments to the right - the waist line, hips, bottom.
  • The upper point is the size of the segment equal to OT/4+2, i.e. T.
  • The middle point is the length of the OB/4+2, t. B.
  • From point B, set aside a perpendicular at the bottom.
  • From point B to the right, draw a line equal to OB/4+1, mark point B1.
  • Through B1 draw a perpendicular to the bottom and waist, t. T1, D1.
  • Connect point T with point B1 using a smooth line, put point D1.
  • Determine the center of the dart.
  • Cut out the pattern.
A-line skirt pattern
A-line skirt pattern

How to make an A-line skirt pattern based on a straight skirt

From the base of a straight skirt, you can make a product that has an A-line silhouette.

School skirt pattern:

  • From the lowest point of the dart, a perpendicular line is drawn downwards.
  • Cut the halves of the products along this line.
  • Cut out the darts.
  • Divide each half into 2 parts - strips.
  • Join the halves of the strips along the dart line.
  • When the dart is hidden, a flare is created.

Please note! The back and front parts have different types of darts. The back area is not closed completely, but to the width of the front part - it will help to eliminate the appearance of "seam convergence".

You might be interested in this:  Patterns and sewing procedure for a half-sun skirt yourself

How to sew a simple school skirt for a girl

Subsequence:

  1. Take measurements: OB, OT, CI.
  2. Construct a pattern according to the measurements obtained, without seam allowances. The sheet dimensions are OT/2+10 cm by DI+10 cm.
  3. Step back 5 cm from the top, i.e. A. Draw a perpendicular from the point to the side edge - the waist line.
  4. Transfer the pattern onto the material, focusing on the directions of the grain and weft threads.
Straight skirt pattern
Straight skirt pattern

Elegant tutu skirt for a baby made of tulle

How to sew a skirt for a child? Material for creating the product: tulle - 5 m, lining - 1 m, thick knitwear - 0.25 m, elastic - 1 m. The width of the product is OT + 15 cm.

Pattern for a children's skirt:

  1. Cut the tulle into 10 pieces of 50 cm each.
  2. Loosen the thread tension on the sewing machine.
  3. Fold the fabric in half, stitching at the top.
  4. Connect the pieces together.
  5. After sewing, do not secure the seam, but carefully pull the ends to gather the skirt.
  6. After reaching the desired width, stitch the edges of the product several times to secure the circle.
  7. Cut the lining 3 cm shorter than the DI with seam allowances.
  8. Stitch the lining along the side.
  9. Connect the lining with the tulle part of the product.
  10. Make a belt from 2 strips of textile, width OT/2+10, then adjust the required width.
  11. Sew the short sides of the strip at a distance of 5 mm, leaving an opening for the elastic.
  12. Fold the circle in half and smooth it out.
  13. Attach the belt to the top, then stitch, keeping the hole for the elastic away from the tulle.
  14. Fold the belt along the ironed line, sew the other edge with a zigzag stitch.
  15. The size of the elastic band is OT.
  16. Decorate the product.
Tulle skirt
Tulle skirt

Skirt for a girl from a man's shirt

To create a skirt from a shirt you need:

  1. Remove the top part with sleeves and collar.
  2. Sew the side lines.
  3. Gather the top edge by creating a large stitch and pulling the thread together, making folds.
  4. Cut out the sleeves and make a belt from the resulting rectangular strips.
  5. Sew on buttons, make a loop.
Shirt product
Shirt product

Fluffy skirt with frills

Step-by-step instructions for creating a 3-tiered frill skirt for a height of 110-116 cm:

  • Cut out strips: 2 rectangles 31×12 cm – for elastic, strip 20×100 cm – 1 tier, strip 22×130 cm – 2 tier, strip 22×170 cm – 3 tier.
  • Sew fabric for elastic.
  • The tiers are sewn separately into a circle, folded in half and the edges sewn together.
  • Sew the strip of the first tier to the belt.
  • Cut off a piece 7.5 cm wide and sew on the side.
  • Sew the last part to the first tier, sew the 2nd tier to the bottom of it.
  • Cut a strip 8.5 cm wide, longer than the previous one, and repeat the procedure.
  • Fold the waistband, stitch, leave 2 cm untouched.
  • Insert the elastic band.
You might be interested in this:  Simple patterns and rules for sewing women's jackets and blazers

If necessary, change the sizes depending on the child's build and wishes.

Please note! If desired, you can increase the number of tiers.

Full skirt with frills
Full skirt with frills

How to cut a pleated skirt

The model pattern is constructed without the use of complex calculations. It is enough to make 1 calculation for a quarter of the skirt, since the front and back are cut the same. K OT/4 + 32 cm. The second value is obtained from the calculation that 8 cm of material is needed to form a fold, therefore 32 cm of fabric for 4 parts.

Instructions:

  1. Fold the fabric in half, fold along the grain line, align the edges.
  2. The fold of the fabric is the center line of the product.
  3. Release 3 cm from the bottom, mark point H for hemming the bottom.
  4. From point N, put DI upwards, put point T.
  5. The skirt is flared towards the bottom, so you need to cut out 3 identical rectangles from a sheet of paper.
  6. Move the pieces apart, creating an expansion of the fabric.
  7. When moving the sheets apart, you need to ensure that the side seam does not extend beyond the material.
  8. Measure the top of the product, the result should be OT/4 + 32 cm.
  9. Connect the top and bottom points with a smooth line.
  10. The folds are placed next to each other at a distance of 3.5-4 cm.
  11. The fold is folded in half with the right side facing inward.
  12. Make a temporary line.
  13. The depth of the fold is folded to the side, pinned and stitched in large increments.
  14. Add a zipper, lining, belt, and finish the bottom.

Important! The folds should not be on the side.

Summer cotton skirt

The product fits several sizes at the same time.

Sewing technique:

  1. For the belt, fold the strip of fabric in half and sew the pieces together from the inside at a distance of 3 mm from the middle.
  2. Turn right side out.
  3. Iron, stitch the middle on the other side.
  4. Take a strip of fabric for the product and make a fold, bending the material at the same distance, fasten with pins.
  5. Stitch on a sewing machine.
  6. Sew on the belt.
  7. Sew in the zipper and sew the side parts of the garment.
  8. Fold the bottom and stitch on the device.
You might be interested in this:  How to choose a sewing machine needle yourself
Summer skirt
Summer skirt

How to sew a skirt with elastic for a girl

The size of the wide belt is OT-5 cm.

Step-by-step instructions for a sun skirt:

  1. Fold the material in 4 times.
  2. Secure the fabric with a pin.
  3. Cut out.
  4. Process the cuts and stitch the edges of the elastic.
  5. Sew the fabric of the product to the elastic band.
  6. Finish the bottom with tape.
Scheme of folding material for the product
Scheme of folding material for the product

How to sew a skirt from old jeans

A pencil skirt is made from skinny jeans. An A-line garment can be made from flared pants.

Instructions:

  1. Determine the length of the skirt, add 3 cm and cut off the legs.
  2. Rip open the inseam of both legs.
  3. Rip open the center seam at the front and back.
  4. Place the pieces one on top of the other to form a flat surface.
  5. Sew the seam from the front to the back.
  6. Trim off any excess fabric from the inside.
  7. Trim and process the bottom.
Product made from old jeans
Product made from old jeans

How to sew a skirt with frills for a girl

Pattern for a 5 year old girl, OB 70 cm, DI 30 cm.

Skirt for girls, pattern:

  1. Construct a pattern on the fabric.
  2. Make a seam allowance of 1 cm.
  3. Sew the side seams.
  4. Fold the top 2.5 cm, overcast and pin.
  5. Sew, distance 2 cm, leave 1 cm unprocessed for elastic.
  6. Sew the top and bottom pieces of each frill in a circle with the right sides facing inward.
  7. Overcast and stitch the bottom of all the pieces.
  8. Sew the pieces together.
  9. Thread the elastic through.
Pattern details
Pattern details

Tatyana skirt for girls

The product is sewn from 2 fragments - a belt, a base.

DIY school skirt, pattern:

  1. Draw 2 rectangles on the canvas, the width is equal to DI, the length is OB + 50 cm for gathering.
  2. Seam allowances 4-5 cm.
  3. Cut out.
  4. Fold the top edge and sew the sides.
  5. Sew the top to create a drawstring.
  6. Thread the elastic through.
  7. Process the bottom.
Tatyana skirt
Tatyana skirt

Please note! In 2019, wrap skirts are trending for girls.

Thus, according to the instructions presented above, you can sew a skirt of any style, type, without spending much effort. All models are suitable for beginners and the highest class.

cloth-en.decorexpro.com
Add a comment

Fabrics for clothing

Fabrics in the interior